Understanding the Size of Water Molecules (See Chart Below)
Reverse Osmosis filters are designed with pores that are only large enough to allow water molecules thru them, thereby effectively filtering out contaminants.
In understanding water molecule size, its important to know that the shape and size of a water molecule is not a perfect sphere. The oxygen atom is flanked on either side by two hydrogen atoms at an angle of about 104.45 degrees. The distance from the center of the oxygen atom to the center of one of the hydrogen atoms is about 95.84 pm (picometers – trillionths of a meter), which equals 0.0000958 µm (micrometers, or microns).
The diameter of a water molecule (H2O) is closely calculated to be about 0.000282 µm (micrometers – millionths of a meter) in diameter.
You may say this number as:
“Two-point-Eight-Two, ten-thousandths of a micron” (or micrometer).
Or you may move the decimal three places and say: “Two-Hundred, Eighty-Two thousandths of a nanometer”.
Or you may move the decimal place so the number is whole, and you may say:
“Two-Hundred, Eighty-Two picometers” or (282 trillionths of a meter).
0.000282 µm (micrometers – millionths of a meter) equals,
0.282 nm (nanometers – billionths of a meter) equals,
282.0 pm (picometers – trillionths of a meter).
Now that’s small!
Understanding Metric Prefixes for Measuring Small Things
These important prefixes are all in relation to the meter (metre):
milli – millimeter (mm) is one-thousandths of a meter – 0.001 meters (10-3)
micro – micrometer (µm) is one-millionth of a meter – 0.000 001 meters (10-6)
nano – nanometer (nm) is one-billionth of a meter – 0.000 000 001 meters (10-9)
pico – picometer (pm) is one-trillionth of a meter – 0.000 000 000 001 meters (10-12)
Converting Metric to the older Imperial system
The older Imperial system, where things are measured in feet, inches and pounds is unfortunately, still widely used in the United States. Unless you are a scientist, engineer or doctor, you’re likely most familiar with the old imperial system. Let’s understand the size of a water molecule in inches.
1 metre (meter is the American spelling) equals 39.36996 inches (1.09361 yard).
The size of a single water molecule in metric is 282 pm (two-hundred, eighty-two picometers).
282 x 10-12 => (0.000 000 000 282) times 39.36996 inches = 11.102-9 inches (0.000000011102 inches).
You may say this number as “eleven-point-one-zero-two, billionths of an inch”. This is the size of a single water molecule (H2O) in inches.
Did I say small before!?
Note: See chart below where the water molecule (H2O) is located. The molecules CL2 is chlorine, and C6H6 is benzene. As you can see, these molecules are slightly larger than a water molecule, and slightly larger than the largest pores in the RO membrane, about 0.0005 µm ( five-ten-thousandths of a micron”, or “half a nanometer”, or “500 picometers”).
These impurities will not physically fit through the pores of a Reverse Osmosis filter, and will be separated from your drinking water.
Click Chart to Enlarge
The human eye is capable of seeing particles down to about 40 microns without the use of a microscope. Use this micron particle size chart to give you perspective on particle sizes.
Click Back to Top of Page