- Price: $.
- The filter steps : 3
- NSF certification… :
- Annual value: $.
- Warranty: 1 year
The APEC WFS-1000 underwater filtering system can be used to clean tap water or well water that has been properly disinfected.
3 filtration steps remove sediment, dust, particles, flavourings, odours, chlorine, volatile organic compounds and other chemicals
- In the first phase, a 5-micron polypropylene sediment filter captures sand, dirt, rust, etc.
- The second stage is equipped with an activated charcoal filter, which has proven superior in removing free chlorine, volatile organic compounds and other contaminants and has greatly improved the taste, smell and appearance of your water.
- There’s two of them.
As you can see, by default, the system is set to the same filters as in Appendices 2 and 3, so you may want to consider upgrading one of these filters.
One of your options is a special fluorine removal cassette, the WFS-10000-FP, which also helps combat bacteria. According to APEC, the filter reduces the fluoride content from 0.5 parts per million to less than 0.1 ppm.
How? It uses activated alumina in granular form, so it is usually an oxidation process.
APEC also introduced the WFS-1000-PB carbon filter to remove lead and bacteria.
The filter meets the NSF 53 requirements for more than 2500 gallons of water at 0.75 gallons per minute. In other words, under these conditions an effective lead reduction is guaranteed.
The last option is the WFS-1000-CHLORM, developed for water supply systems that use chloramine instead of chlorine for disinfection. In addition to the chloramines, hydrogen sulphide is also broken down by oxidation in the catalyst gas. A cartridge can contain up to 1,500 gallons.
Whichever option you choose, all filters are created in the United States.
Required supply water pressure : Between 20 and 85 pounds per square inch.
What we like
Other benefits of the APEC WFS-1000
- The required minerals are stored in the water and thus added to the daily diet.
- The flow is fast enough to avoid long waiting times.
- The system comes with a one-year warranty with the assistance of WQA certified U.S. water experts.
N.A.: When installing the WFS-1000, avoid hot or cold temperatures and direct sunlight.
Even if you’re not self-taught and haven’t done much plumbing, you should be able to get the system up and running in an hour or two.
The configuration is – thanks in part to the fast connection – quite simple, even though the direction can be a bit confusing in the beginning.
- Responsible for the system
- 3 Filter + housing
- Food, coloured tubes
- ½ or 3/8 Power supply water adapter
- Lead-free 360° rotating valve with adapter, washer + nut
- Key to the property
- teflon tape
Parts for filters/membranes
Compared to other flushing units, the units supplied with the WFS-1000 have an increased capacity for up to 12 months of clean, refreshing drinking water before replacement – less maintenance for you.
However, if you receive water from a private source, you may need to replace it sooner because of the increased content of sediment and other particles.
Filter change is a matter of minutes:
- First switch off the water supply to the system.
- Open the valve to relieve pressure from the inside.
- Remove the three filter housings.
- Discard old filters, clean the housings with fresh soapy water if necessary and insert new cartridges.
- Screw the enclosures back on to make sure the O-rings are properly installed.
- Turn on the water supply.
- Check for leaks.
- Let’s go, let’s go, let’s go, let’s go!
Annual replacement costs? Pretty cheap.
You can consult the official manual by clicking on this link Click on
What we don’t like is.
For more serious cases of contamination, it is not sufficient to place it under the sink. We also lack NSF certificates to reduce pollution.
In addition, some customers complained that the faucet was too fragile and therefore difficult to tighten on the sink or table top, making it vulnerable to leaks.
If you want to put the finishing touches to your water and solve your taste problems in a nutshell, you should definitely call on EPAC’s WFS-1000. It does what it says, and since all sizes are standard, you can choose from a wide range of replacement filters for customer service.
In general, you get drinking water of excellent quality at an affordable price. Three and a half stars!
By the way, as we read a lot of complaints, the APEC WFS-1000 does not reduce TDS, which is not necessarily a bad thing. We do not consider TDS to be a good method for measuring the quality of drinking water.
Are you looking for other APEC water filtering advice?
For more information about APEC water filtration systems, please visit https://www.best-osmosis-systems.com/apec-water-filter-systems-reviews/.
Of course we also have information about the filtration systems of other brands of sinks.
This concludes our review of the APEC WFS-1000. If you have any questions, please leave a comment below!
apec water wfs-1000 replacement filters,apec wfs-1000 specs
Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.